Bosch Dishwasher E25 Repair Cost: The Blocked Drain Pump

E25 on a Bosch dishwasher means a blocked drain pump. What the repair costs from the cheapest outcome to a new pump, and the two free checks worth doing first.

7 min Updated 2026-10-06 Denys Danyliuk

Key Takeaways

  • E25 on a Bosch dishwasher means the drain pump impeller is jammed or obstructed.
  • The cheapest outcomes start from $89 for a reseated cover and from $139 for a removed object.
  • A worn impeller or failed pump motor moves the repair to from $249.
  • Do not keep running cycles: a blocked pump can overheat and turn a small fix into a replacement.
  • The final price follows an on-site diagnosis, with a written estimate before work starts.

The Bottom Line

E25 repair cost depends on what is inside the pump: a loose cover or trapped object is the low end, a worn impeller or dead motor the high end. Stop running cycles, check the cover and sump, and book a diagnostic from $89.

Expect a Bosch dishwasher E25 repair cost from $139 when the cause is a trapped object or a loose pump cover, and more only if the pump itself has worn out. E25 means the drain pump is blocked, usually by something hard that slipped past the filter, and it is the one drain code where the price depends almost entirely on what the technician finds inside the pump.

What the visit findsWhat you noticedTypical starting price
Diagnostic onlyE25 on the display, water left in the tubfrom $89
Pump cover not seatedCode appeared after a filter cleanfrom $89, often fixed on the spot
Foreign object in the impellerPump hums but water does not movefrom $139
Worn or broken impellerGrinding noise, weak pumpingfrom $249
Pump motor failedNo sound from the pump at allfrom $249 plus the part

What Does Bosch Dishwasher E25 Mean?

E25 means the drain pump is blocked. The site's dishwasher E25 error page separates it from E24, a general drain blockage: with E25 the impeller itself is jammed or obstructed, often by a foreign object that passed through the filter. That is why the symptoms include a gurgling, humming or grinding sound under the tub and a pump you can hear running while the water level does not drop.

The cost follows from that. A blocked filter is free to fix, but a jammed impeller sits behind the sump and sometimes needs the machine pulled from the cabinet.

How Much Does It Cost to Fix an E25 Error?

The diagnostic starts from $89, and most E25 repairs land in the first two or three rows of the table above. The bill grows only when the impeller blades are worn or broken, or when the motor has failed from running against a blockage.

  • Cover reseated or object removed: the lowest outcome, from $89 for a reseated cover and from $139 for a removed object, and the most common result.
  • Impeller replaced: from $249, because the part has to be matched to your model.
  • Whole pump replaced: from $249 plus the part, when the motor windings or bearings are gone.
  • Labor reaching the pump: usually small, but it climbs if the dishwasher must be slid out and disconnected.

The final price is confirmed after the on-site diagnosis, and you receive a written estimate before any work begins. For the wider picture, see what Bosch dishwasher repairs cost.

A macro view of a dishwasher drain pump impeller with a small curved glass shard wedged between two blades and a fruit pit beside it, even side light, blurred sump housing behind.
Hard debris that slips past the filter is what jams the impeller and raises E25.

Is It Safe to Run a Bosch Dishwasher With E25?

No, do not run the dishwasher until the blockage is cleared. The site's quick assessment warns that a blocked drain pump can overheat if it runs continuously, and an overheated pump is a repair that starts from $249 instead of from $89.

  • Stop at the first grinding sound. A hard object in the impeller chews the blades with every attempt to drain.
  • Stop at a burning smell. That is the pump motor straining, and it is the point where a cheap fix turns into a pump replacement.
  • Cut power at the breaker before looking in the sump. Never reach in while the machine is connected.
  • Bail the water out by hand if you must. A cup and a towel are cheaper than another cycle.

Two Free Checks Before You Book

Both checks come straight from the site's code page, and both can change the bill.

  1. Remove the bottom filter and look at the pump cover, the white circular cap in the sump. It should click when seated, and an unseated cover is a common cause of E25.
  2. With power off at the breaker and a flashlight, look into the sump for a visible object such as glass, a fruit pit or a toothpick.
  3. If you can lift the object out with the filter removed, do so, then refit the filter and run a short cycle.
  4. If the object cannot come out without disassembly, or the impeller does not turn freely, stop there and book.

If a clean-out clears the code, you paid nothing. If not, you now know what to tell the technician, which shortens the visit. A neglected filter is how objects reach the pump in the first place; the Bosch dishwasher maintenance guide shows the monthly routine.

Is E25 Worth Repairing, or Is the Dishwasher Done?

Repair it in almost every case, because a drain pump is a modest part on a machine that is otherwise sound. The cheaper cousin is E22, a clogged filter that you can usually clear yourself; E25 is what E22 becomes when debris reaches the pump.

Replacement only enters the conversation when the dishwasher is old and has other faults at the same time. Our guide to repairing or replacing a Bosch dishwasher shows where that line usually falls by age.

What Moves the Price Up or Down

Three things decide where an E25 visit lands, and you can influence two of them before the technician arrives.

  • How long it ran blocked. A pump that was stopped quickly usually has an undamaged motor, while one that ran for weeks against a jam may have a worn impeller or burnt windings.
  • Access to the machine. A dishwasher that slides out freely is a short job; one boxed in by a countertop, tile or a tight supply line takes longer, and labor reflects that.
  • Whether the part is a stock item. Common impellers and covers are quick; less common pump assemblies may mean a second visit.
  • What else is found. The technician looks at the hose and the filter housing while the pump is open, and a restricted hose adds a small separate charge.

Telling us the model number and what the pump sounds like when you book helps with the third point. A hum with no water movement points at a jam, while silence points at the motor.

What an E25 Visit Looks Like

The technician starts by confirming the code and watching a drain attempt, which separates a jammed impeller from a failed motor in a couple of minutes. Then the filter and cover come out, the sump is inspected, and the impeller is turned by hand to feel for resistance.

  1. Confirm E25 and observe whether the pump runs.
  2. Remove the filter and check the cover seating.
  3. Clear any object and test that the impeller spins freely.
  4. Run a drain test and, if it passes, finish with a short cycle.
  5. If a part is needed, you get a written estimate before anything is ordered or fitted.

Most simple clearances finish in that single visit, and the machine is back in service the same day.

The diagnostic turns a starting price into a real one. Our Bosch dishwasher repair service covers the pump, the cover, the impeller and the hose in one visit, and the diagnostic starts from $89. You can book a visit or send us your model number and what you hear from the pump so the right part is on the truck the first time.

Feedback

Was This Guide Helpful?

Explore more resources or get in touch if you need further assistance.