Dishwasher Medium Severity
E25 Appliance Error Code

Bosch Dishwasher E25 Error: Drain Pump Blocked

What Does Bosch Dishwasher Error Code E25 Mean? Error code E25 indicates the drain pump in your Bosch dishwasher is blocked. Unlike E24 (general drain blockage), E25 specifically points to the pump impeller being jammed or obstructed, often by a foreign object that has passed through the filter. Common Causes The most common cause is […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. A blocked drain pump can overheat if run continuously. Do not use the dishwasher until the blockage is cleared.

Can I reset the code?

Yes. If the pump cover was simply loose, reseating it and resetting the dishwasher should clear E25. If a foreign object is stuck in the impeller, a reset alone will not work.

When to stop immediately?

Stop if you notice: Grinding or clicking sounds from the pump, A burning smell from the pump area.

Symptoms You May Notice

Gurgling sounds from the pump area

An unusual gurgling, humming, or grinding noise comes from beneath the dishwasher tub during drain cycles.

Water not draining from tub

Water remains in the bottom of the dishwasher after the cycle, similar to E24 but with audible pump struggle.

Pump runs but no water exits

You can hear the drain pump motor running but water level does not decrease.

Possible Causes

1

Foreign object in pump

A piece of glass, a fruit pit, a toothpick, or similar hard object has wedged in the pump impeller.

Requires Professional
2

Pump cover not secured

The drain pump cover is loose or improperly seated after cleaning, preventing proper pump operation.

DIY Possible
3

Worn pump impeller

The pump impeller blades have worn down or broken, reducing pumping efficiency.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Check the pump cover

    Remove the bottom filter and check that the pump cover (the white circular cap in the sump) is properly locked into place.

    The pump cover should click when properly seated. An unseated cover is a common cause of E25.

  2. 2

    Look for visible obstructions

    With the filter removed, use a flashlight to look into the sump area for any visible foreign objects.

    Never reach into the sump without first disconnecting power at the breaker.

    Tools required

When to Call a Professional

Contact a qualified technician if:

  • Foreign object is visible but cannot be removed without disassembly
  • Pump motor makes grinding noise
  • Pump impeller does not rotate freely

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Dishwasher Repair Service Schedule Appointment