Bosch Dryer E08 Error: Temperature Sensor Fault
What Does Bosch Dryer Error Code E08 Mean? Error code E08 indicates the NTC temperature sensor has malfunctioned. The dryer cannot properly regulate heat, causing inconsistent drying results. What You Can Do Switch to timed-dry programs as a temporary workaround — these don’t rely on the temperature sensor. Try a power reset to clear a […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. Safe to use with timed dry programs. Avoid sensor-dry modes until the sensor is replaced.
Can I reset the code?
Yes. A reset may clear a temporary glitch. A faulty sensor will re-trigger the error.
When to stop immediately?
Stop if you notice: Clothes come out extremely hot, Burning smell during operation.
Symptoms You May Notice
Clothes over-dried or under-dried
Laundry comes out either scorching hot and stiff, or still damp.
Dryer doesn't shut off automatically
Sensor-dry programs run indefinitely because the sensor can't detect proper moisture levels.
Possible Causes
Failed NTC thermistor
The temperature sensing resistor has drifted or failed.
Requires ProfessionalCorroded sensor connection
Moisture from condensation has corroded the sensor wire terminals.
Requires ProfessionalSafe Checks You Can Do
-
1
Use timed dry mode
Switch from sensor-dry to a timed-dry program as a workaround while awaiting repair.
Timed dry does not rely on the temperature sensor.
-
2
Power cycle
Unplug for 2 minutes, then restart.
May clear a temporary sensor error.
When to Call a Professional
Contact a qualified technician if:
- Sensor resistance does not match spec
- Error returns after every reset
- Connector is corroded
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Dryer Repair Service Schedule Appointment