Bosch Washer E04 Error: Door Not Closed
What Does Bosch Washer Error Code E04 Mean? Error code E04 on a Bosch washing machine means the door is not properly closed or the door lock mechanism has malfunctioned. This safety feature prevents the washer from operating with an open door. Common Causes The most common cause is something caught in the door seal […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
No. The washer will not operate until the door is properly closed and locked. This is a safety feature.
Can I reset the code?
Yes. If the obstruction is removed and the door latches properly, the error clears automatically when you start a new cycle.
When to stop immediately?
Stop if you notice: The latch does not click when closing the door, The door bounces back open after pushing.
Symptoms You May Notice
Machine beeps and refuses to start
The washer beeps when you press Start but does not begin the cycle.
Door appears closed but won't latch
The door pushes shut but you do not hear or feel the latch click into place.
Door lock indicator not lit
The lock symbol on the display does not illuminate after closing the door.
Possible Causes
Door not fully closed
Clothing or a small item is caught in the door seal, preventing full closure.
DIY PossibleWorn door latch
The latch mechanism has worn over time and no longer engages securely.
Requires ProfessionalFaulty door lock actuator
The electronic door lock that secures the door during operation has failed.
Requires ProfessionalSafe Checks You Can Do
-
1
Check for obstructions
Open the door and inspect the seal area for clothing, small items, or debris preventing full closure.
Run your hand around the entire rubber door gasket to feel for trapped items.
-
2
Close the door firmly
Push the door shut until you hear a distinct click from the latch mechanism.
On Bosch front-loaders, a firm push is needed — do not slam.
-
3
Power cycle the washer
Turn the washer off, wait 30 seconds, then turn it back on and try again.
A brief power cycle can reset the door lock sensor if it experienced a glitch.
When to Call a Professional
Contact a qualified technician if:
- Latch mechanism is visibly damaged or loose
- Door lock actuator does not engage when powered
- Error persists with no obstruction present
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Washer Repair Service Schedule Appointment